Cisco Bug: CSCvs57255 - 9800 WLCs Don't Have A Setting To Configure Custom NAS-ID In AP Join Profile
May 18, 2020
- Cisco Catalyst 9800 Series Wireless Controllers
Known Affected Releases
Symptom: When trying to configure a new 9800-40 WLC HA Pair, the NAS-ID field does not appear on the AP Join Profile as explained in the online configure guide. "CDP Interface In the CDP Interface tab, enable the CDP state, if required. Enter the group NAS ID. Network Access Server identifier (NAS-ID) is sent to the RADIUS server by the controller through an authentication request to classify users to different groups so that the RADIUS server can send a customized authentication response. Click Save & Apply to Device." The CDP Interface TAB exists and can enable/disable CDP as described but the NAS ID field is not available. This should be the same no matter the software version as explained in all these configuration guides: 16.10.x https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/new-configuration-model.html 16.11.x https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-11/config-guide/b_wl_16_11_cg/new-configuration-model.html 16.12.x https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/config-guide/b_wl_16_12_cg/new-configuration-model.html Conditions: None.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases