Preview Tool

Cisco Bug: CSCvs16308 - Fix messages when XBAR is disabled due to internal CRC errors

Last Modified

May 04, 2020

Products (1)

  • Cisco MDS 9000 Series Multilayer Switches

Known Affected Releases


Description (partial)

Clarify messaging when the hardware fabric crc threshold function detects sufficient internal CRCs on an XBAR.

 %XBAR-2-XBAR_MONITOR_INTERNAL_CRC_ERR: Fab_slot-23 detects CRC error at ingress stage2, putting it in failure state 
%MODULE-2-XBAR_DIAG_FAIL: Xbar 5 (Serial number: JAE22450BQT) reported failure 23/1-23/0 due to XBM - CRC error detected on Module in device DEV_XBAR_COMPLEX (device error 0x0)

1 - " Fab_slot-23 detects CRC error at ingress stage2" seems to be wrong. It should indicate "stage 3" not "stage 2".
2 - In the same message it should say "Xbar 5" and not "Fab_slot-23".

Occurs when "hardware fabric crc threshold" is configured and sufficient internal CRCs are detected on an XBAR.
Only applies to MDS 9700 switches.
Bug details contain sensitive information and therefore require a account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.