Guest

Preview Tool

Cisco Bug: CSCvj12003 - 8.8:NBN AP CLI doesn't print warning like CLI for mesh dhcp enable or disable

Last Modified

Aug 27, 2018

Products (1)

  • Cisco Aironet 1850 Series Access Points

Known Affected Releases

8.8(1.112)

Description (partial)

Symptom:
The mesh DHCP command on RAP, on WLC, has warning to reload MAP but on AP, nothing printed out.


(tb30-khanda-70) >config ap mesh-internal-dhcp enable VW-1542E4-RAP2.6FC8

Warning! Changing internal DHCP mode will cause Mesh service disruption.
For quicker convergence it is recommended to reboot MeshAPs on DHCP change.

Are you sure you want to continue? (y/n)y



(tb30-khanda-70) >config ap mesh-internal-dhcp enable VW-1542E4-RAP2.6FC8

Warning! Changing internal DHCP mode will cause Mesh service disruption.
For quicker convergence it is recommended to reboot MeshAPs on DHCP change.

Are you sure you want to continue? (y/n)y


 Mesh internal DHCP mode is already in the requested state

(tb30-khanda-70) >


But on RAP:
1542E4-RAP2.7380#show mesh  dhcp config 
Internal DHCP Server configuration:
-----------------------------------

Status: Disabled
Mgmt vlan ID: 0
Start Address: 10.1.1.2
End Address: 10.1.200.200
Netmask: 255.255.0.0
Gateway: 10.1.1.1


1542E4-RAP2.7380#configure mesh  dhcp start-server 
[*04/23/2018 18:21:16.0899] chatter: tohost_vlan0 :: ToHost: device 'vlan0' went down
[*04/23/2018 18:21:16.2399] chatter: MeshNat: add_dhcp_scope IP=10.1.0.0 Mask=255.255.0.0, GW=10.1.1.1
[*04/23/2018 18:21:16.3199] chatter: tohost_vlan0 :: ToHost: device 'vlan0' came up
1542E4-RAP2.7380#configure mesh  dhcp start-server 
Internal DHCP Server already running!

Conditions:
na
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.