Guest

Preview Tool

Cisco Bug: CSCvi96744 - cBR8 - Re-add 8,32,64 qam modulations in cable modulation profiles for station and initial IUCs

Last Modified

Jun 02, 2018

Products (6)

  • Cisco cBR Series Converged Broadband Routers
  • Cisco ASR 1000 Series Route Processor (RP2)
  • Cisco ASR 1002-HX Router
  • Cisco cBR-8 Converged Broadband Router
  • Cisco ASR 1001-HX Router
  • Cisco ASR 1000 Series Route Processor (RP3)

Known Affected Releases

16.8.1

Description (partial)

Symptom:
cBR8 running 16.8.1 does not accept Modulation-Profiles for Station or Initial IUC with Modulation 8,32 or 64QAM anymore, causing some modulation profiles to be incomplete when booting from an earlier release to 16.8.1.

The following message would be seen in the logs after booting into 16.8.1

    %The primary Modulation Profile is empty or not ready

The removed commands are: 

cable modulation-profile <x> atdma station  <x> <x> <x><x> 64qam
cable modulation-profile <x> atdma station  <x> <x> <x><x> 8qam
cable modulation-profile <x> atdma station  <x> <x> <x><x> 32qam

cable modulation-profile <x> atdma initial  <x> <x> <x><x> 64qam
cable modulation-profile <x> atdma initial  <x> <x> <x><x> 8qam
cable modulation-profile <x> atdma initial  <x> <x> <x><x> 32qam

This will cause any upstream channel using those modulation profiles to be down until the modulation profile is reconfigured using the workaround below

Conditions:
Loading 16.8.1 and having modulation profiles using either 8,32,64qam for initial or station IUCs
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.