Cisco Bug: CSCvi80270 - ASR 1001-X Incorrectly Enables "throughput_20g" License on IOS-XE 3.x Irrespective of Configuration
Apr 10, 2018
- Cisco ASR 1000 Series Aggregation Services Routers
Known Affected Releases
Symptom: An ASR 1001-X router running IOS-XE 3.16.x code will incorrectly enable the "throughput_20g" license irrespective of how it is actually configured. For example, if the router has no specific "platform hardware throughput level" configuration and should normally default to 2.5 Gbps, it will still operate at 20 Gbps. If the router is explicitly configured for any other throughput level, such as 10 Gbps, it will still operate at 20 Gbps. Example: ROUTER#show license detail | beg throughput_20g Index: 15 Feature: throughput_20g Version: 1.0 License Type: RightToUse License State: Active, In Use License Count: Non-Counted License Priority: Low Store Index: 11 Store Name: Built-In License Storage ROUTER#show run | inc throughput ROUTER# In the above example, no "platform hardware throughput level" config is present, yet the "throughput_20g" is erroneously enabled. Conditions: This is only seen with an ASR 1001-X, which uses software licensing to determine throughput level. Router is running IOS-XE 3.16.x (and possibly earlier builds of 3.x.x code). Issue is *not* seen on IOS-XE 16.x Polaris images. Therefore, if an ASR 1001-X router is upgraded from a 3.x.x image to 16.x image, there may be a perceived drop in throughput level if the 20 Gbps license was previously erroneously enabled on the older code.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases