Guest

Preview Tool

Cisco Bug: CSCvh87030 - "Unknown option (0)" in "show policy-map interface" output

Last Modified

Sep 14, 2019

Products (1)

  • Cisco Nexus 7000 Series Switches

Known Affected Releases

6.2(14)

Description (partial)

Symptom:
When collecting an output of "show policy-map interface" you may see "Unknown option (0)" match-classifier instead of match-all/match-any:


sh policy-map interface input type qos  | b 1006


Class-map   CM_L2_MCAST_DATA  Unknown option (0) <==

     Aggregate forwarded :
      0 packets 
      Match: access-group MACL_L2_MCAST_DATA
        0 packets 
      police cir 1 mbps bc 200 ms 
        conformed 0 bytes, 0 bps action: transmit 
        violated 0 bytes, 0 bps action: drop 

...

Class-map   class-default  Unknown option (0) <==

     Slot 1
      3209731655 packets  20696807407832 bytes
      5 minute offered rate 34191 bps

     Aggregate forwarded :
      3209731655 packets  20696807407832 bytes

Conditions:
This is a pure cosmetic issue in qosmgr and it is visible only in case of generic "show policy-map interface" output.
The same problem is not observed, when "show policy-map interface <int>" is used - for example the next qos cmd will give you a proper output:


sh policy-map interface Ethernet1/25 input type qos
...

Class-map (qos):   class-default (match-any) <=== OK

     Slot 1
      3209729612 packets  20696806205385 bytes
      5 minute offered rate 34355 bps

     Aggregate forwarded :
      3209729612 packets  20696806205385 bytes
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.