Guest

Preview Tool

Cisco Bug: CSCvh83459 - Storm-control in PPS -- 'show storm-control' only prints the 1st interface in the output

Last Modified

Sep 17, 2019

Products (1)

  • Cisco Catalyst 4500 Series Switches

Known Affected Releases

15.2(5)E

Description (partial)

Symptom:
When storm-control is configured in packets per second (pps) under the 1st interface on the switch (for example, Te1/1), regardless if you have all other interfaces configured for the same storm-control config, you will only see the 1st interface listed in the 'show storm-control' output:

4500X-2(config-if)#do sh storm-control
Interface  Filter State   Broadcast Multicast Level
---------  -------------  --------- --------- -----
Te1/1      Forwarding     Enabled   Disabled     80k pps   <<<<<< In pps

Conditions:
Storm-control configured under the 1st interface and using the 'pps' option. For example:

interface TenGigabitEthernet1/1
 storm-control broadcast level pps 80k
end
!
interface TenGigabitEthernet1/2
 storm-control broadcast level pps 80k
!
endinterface TenGigabitEthernet1/3
 storm-control broadcast level pps 80k
end


4500X-2(config-if)#do sh storm-control
Interface  Filter State   Broadcast Multicast Level
---------  -------------  --------- --------- -----
Te1/1      Forwarding     Enabled   Disabled     85k pps

(You will not see your other interfaces listed)
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.