Symptom:
The user modifies the Admin Status of one STM controller to MAINTENANCE.

After Reactive Inventory is complete, if the user refresh the Logical View / OpticalInterfaces / Provisioning / Adminstatus / Optical Controllers table, the status of the controller changes back to UP while  the status of the controller on the device remain in MAINTENANCE.

Conditions:
1. Access CEPNM as Config Manager or Root user
2. Navigate to Inventory / Network Devices
3. Select the NCS4000 device
4. Navigate to Logical View / OpticalInterfaces / Provisioning / Adminstatus / Optical Controllers
5. Select one STM controller and then the Edit button
6. Modify the Admin Status to MAINTENANCE and Save
7. Wait for Reactive Inventory to complete
8. Return to the Optical Controllers table and Refresh
9. Verify the status of the modified controller is reverted to UP
10. From CLI verify the status of the modified controller is still 'sec-admin-state maintenance' 

Reproducibility: 3/3