Cisco Bug: CSCut49513 - RTT:Message detail on GHI and CLI are mismatching for TraceType=NextCall
Feb 04, 2017
- Cisco ASR 5000 Series
Known Affected Releases
Symptom: While verifying the next call operation of RTT feature it has been observed some message are missing on GUI. It has been observed last few lines are always missing in the output of real time out put as well as historical output. Conditions: To verify this issue do the following steps: Install intracer build 16.0.319. 1: Login to Intracer GUI and navigate to Configure -> LTE Trace > Real Time Trace Config. Enable "Enable Real Time Trace" check box, make sure "Node CPU Threshold"=75% and "Trace Path" is configured. 2:Navigate to Trace > 3GPP Trace > Real Time Traces > New and enter valid details and click on Save button. Ex: Name = RTT_Test Duration= 20 mins Node = TestNode (Make sure this LTE node should be configured prior to this step) Trace Type = Next-Call 3: Select this configured RTT and click on start. On GW fire the cli "monitor subscriber next-call" and make sure Verbosity level set to 5. 4: Create a LTE session based on the node configuration and verify if the traces are captured. 5: On completion compare the out put of CLI, RTT Histoty and real time data on GUI.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases