Guest

Preview Tool

Cisco Bug: CSCut40305 - console logs are creating during AP-GUI login session and pse status

Last Modified

May 21, 2018

Products (1)

Known Affected Releases

8.0(115.229) 8.1(104.21)

Description (partial)

Symptom:
console logs are creating during AP-GUI login session and pse status

Conditions:
Issue 1: AP GUI Login event throws console logs when AP powered through POE/POE+ and with same AP source, if execute cli "show pse_status" also this console logs come.

*Mar  8 01:01:51.411: I2C bus 2 write transaction did not rx ACK at line: 300, SR = 0x00A3
*Mar  8 01:01:51.411: I2C bus 2 write transaction did not rx ACK at line: 300, SR = 0x00A3
*Mar  8 01:01:51.411: I2C bus 2 write transaction did not rx ACK at line: 446, SR = 0x00A3
*Mar  8 01:01:51.411: I2C bus 2 write transaction did not rx ACK at line: 300, SR = 0x00A3

Issue 2: When unplugged the gig port from AP, prints following logs,
PSE Interrupt is generated
COMPLETION OF CLASSIFICATION!!!
COMPLETION OF DETECTION!!!
LOAD DISCONNECTION!!!
PGOOD STATUS CHANGED!!!
POWER ENABLE STATUS CHANGED!!!

Related Community Discussions

8.0MR3 Beta Availability
8.0.122.x Available - 8.0MR3 Beta 8.0MR3 (8.0.132.0) is now posted, the beta process is closed. Thanks for all the feedback! Resolved Caveats CSCtl96208 capwap ap hostname CLI returns "ERROR!!! Command is disabled." CSCtu45614 Spectrum Management Bit Should be set to 1 all the time CSCul07738 DPAA Tx/Rx stuck; reload due to ethernet interface receive failure CSCum86031 Roaming 5508 to 5760 applies wrong QOS policy on configuring aaa-overrid CSCun12965 Lightweight AP should not send jumbo frame by ...
Latest activity: Apr 01, 2016
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.