Guest

Preview Tool

Cisco Bug: CSCus85038 - Falco: Wrong AIS/Squelch parameters on client ports

Last Modified

Sep 18, 2015

Products (1)

  • Cisco Prime Optical

Known Affected Releases

10.3(0.0.137)

Description (partial)

Symptom:
On the Falco (MR-MXP), the AIS/Squelch parameters on the client ports are not aligned with CTC.

  CTC    Disable / Squelch / LF
  -----------------------------------------
  CPO    AIS / Squelch / Disable / LF

Please, check the attached screenshot for reference.

Conditions:
For MPX-200G card mode
     Equip one 100GS-CK-LC in slot 2 and the two M-CFP-LC in slot 3 and slot 4
     Configure the 100GS-CK-LC in MPX-200G card mode associating slot 2 as peer card and slot 3 as skip card
     Create the PPM on port 1 to 10 on MR-MXP in slot 4.
     Check the AIS/Squelch parameters on both CTC and CPO
					   
For MPX-CK-100G card mode
     Equip one 100GS-CK-LC in slot 2 and one M-CFP-LC in slot 3
     Configure the 100GS-CK-LC in MPX-CK-100G card mode associating slot 2 as peer card
     Create the PPM on port 1 to 10 on MR-MXP in slot 4.
     Check the AIS/Squelch parameters on both CTC and CPO
					   
For MXP-10X10G-100G card mode
     Equip one 100GS-CK-LC in slot 2, one 10x10G-LC card in slot 3, one M-CFP-LC in slot 4
     Configure the 100GS-CK-LC in MXP-10X10G-100G card mode associating slot 2 as peer card and slot 4 as skip card
     Create the PPM on port 1 to 10 on MR-MXP in slot 4.
     Check the AIS/Squelch parameters on both CTC and CPO
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.