Guest

Preview Tool

Cisco Bug: CSCus45255 - N7K: Cosmetic CLI QoS Policy Name is 1st QoS Class-Map ACL Name (wrong)

Last Modified

Feb 05, 2017

Products (8)

  • Cisco Nexus 7000 Series Switches
  • Cisco Nexus 7000 10-Slot Switch
  • Cisco Nexus 7000 4-Slot Switch
  • Cisco Nexus 7700 6-Slot Switch
  • Cisco Nexus 7700 18-Slot Switch
  • Cisco Nexus 7000 18-Slot Switch
  • Cisco Nexus 7000 9-Slot Switch
  • Cisco Nexus 7700 10-Slot Switch

Known Affected Releases

6.2(10)

Description (partial)

Symptom:
In the following show commands, the QoS Policy id / policy-name refers to the name of the 1st class-map in the QoS policy. 

N7K# show hardware access-list vlan 924 module 2
Policies in ingress direction / Policies in egress direction:
         Policy type              Policy Id      Policy name
------------------------------------------------------------
    QoS                                5          QoS_Class_Map_Name1     -----------   should be QoS Policy Name

N7K# show system internal access-list vlan 924 output config module 2
 
         Policy id:  3, Type: QoS, Protocol: IPv4   Name: QoS_Class_Map_Name1      ---------  should be QoS_Policy_Map_Name


N7K# show system internal access-list vlan 924 output statistics
 
       Policies: QoS(QoS_Class_Map_Name1)       --------    should be QoS_Policy_Map_Name

there may be other show commands / to be confirmed as part of the fix.

Conditions:
QoS class-map in QoS Policy map use 'access-group' matching statements to access control lists.

N7k# sh run ipqos

!Command: show running-config ipqos

version 6.2(10)
class-map type qos match-all QoS_Class_Map1
  description 1st QoS Class-Map
  match access-group name QoS-Class-Map1-ACL
class-map type qos match-all QoS_Class_Map2
  match access-group name QoS-Class-Map2-ACL
policy-map type qos QoS_Policy_Map
  class QoS_Class_Map1
    set dscp 18
  class QoS_Class_Map2
    set dscp 10
  class class-default
    set dscp 0

vlan configuration 924
  service-policy type qos output QoS_Policy_Map
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.