Cisco Bug: CSCus06159 - ASR9K: 9000v: transceiver permit pid all should not be accepted config
Feb 16, 2018
- Cisco ASR 9000 Series Aggregation Services Routers
Known Affected Releases
Symptom: "transceiver permit pid all" configuration is accepted on 9000v ports but will fail when committed Conditions: Attempt to implement "transceiver permit pid all" configuration on a 9000v satellite port RP/0/RSP0/CPU0:(config)#int g100/0/0/0 RP/0/RSP0/CPU0:(config-if)#transceiver permit pid all RP/0/RSP0/CPU0:(config-if)#commit Mon Dec 8 15:52:32.100 UTC % Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors RP/0/RSP0/CPU0:(config-if)#sh config failed % Ambiguous command: "sh config failed" RP/0/RSP0/CPU0:(config-if)#sh config failed??????? Mon Dec 8 15:52:36.111 UTC !! SEMANTIC ERRORS: This configuration was rejected by !! the system due to semantic errors. The individual !! errors with each failed configuration command can be !! found below. interface GigabitEthernet100/0/0/0 transceiver permit pid all !!% 'CfgMgr' detected the 'fatal' condition 'This configuration has not been verified and can not be accepted by the system.' !
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases