Guest

Preview Tool

Cisco Bug: CSCur69904 - FlexAP+ local Auth not showing client subnet mask and Gw details

Last Modified

Nov 18, 2014

Products (1)

  • Cisco 5500 Series Wireless Controllers

Known Affected Releases

8.1(10.58)

Description (partial)

Symptom:
FlexAP+ local Auth client not showing client subnet mask and Gw details

Conditions:
1. Configure a WLAN with Local Switching, Local Auth and AAA override enabled
2. On Flexconnect group, configure the AAA server ip address, shared key and port details
3. Attach the Flex group with the template where the vlan-name to id mapping configured
4. Test with the client and it will receive an IP address from correct vlan as per vlanname-to-id mapping
5. On the WLC "show client detail <mac-addr> and AP "show capwap reap association" o/p is not updated with client subnet mask & gw ip details

WLC O/P:
=======
(SCRUM-TALWAR-01) >show client detail 24:77:03:cc:39:7c
Client MAC Address............................... 24:77:03:cc:39:7c
Client Username ................................. divyap
AP MAC Address................................... 58:bc:27:93:58:60
AP Name.......................................... DIVP-AP3500
AP radio slot Id................................. 1
Client State..................................... Associated
Client User Group................................ divyap
Client NAC OOB State............................. Access
Wireless LAN Id.................................. 3
Wireless LAN Network Name (SSID)................. Flex-test-03
Wireless LAN Profile Name........................ Flex-test-03
Hotspot (802.11u)................................ Not Supported
BSSID............................................ 58:bc:27:93:58:6d
Connected For ................................... 1414 secs
Channel.......................................... 36
IP Address....................................... 9.10.65.11
Gateway Address.................................. Unknown
Netmask.......................................... Unknown
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 1

AP O/P:
======
DIVP-AP3500#show capwap reap association
Address           : 2477.03cc.397c     Name             : DIVP-AP3500
IP Address        : 9.10.65.11         IPv6 Address        : ::
Gateway Address   : 0.0.0.0
Netmask Address   : 0.0.0.0            Interface        : Dot11Radio 1
Bridge-group        : 4
reap_flags_1        : 0x0     ip_learn_type       : 0x0       transient_static_ip : 0x0
Device            : ccx-client         Software Version : NONE
CCX Version       : 4                  Client MFP       : Off

State             : EAP-Assoc          Parent           : self
SSID              : Flex-test-03
WLAN              : 3
Hops to Infra     : 1                  Association Id   : 1
Clients Associated: 0                  Repeaters associated: 0
Tunnel Address    : 0.0.0.0
Key Mgmt type     : WPAv2              Encryption       : AES-CCMP
Current Rate      : m15-2               Capability       : WMM
Supported Rates   : 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0-2 m1-2 m2-2 m3-2 m4-2 m5-2 m6-2 m7-2 m8-2 m9-2 m10-2 m11-2 m12-2 m13-2 m14-2 m15-2
Voice Rates       : disabled           Bandwidth        : 20 MHz
Signal Strength   : -28  dBm           Connected for    : 2291 seconds
Signal to Noise   : 50  dB            Activity Timeout : 300 seconds
Power-save        : Off                Last Activity    : 0 seconds ago
Apsd DE AC(s)     : NONE
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.