Cisco Bug: CSCur36833 - 3850 Dynamic NEAT config overwrites with save
Nov 27, 2020
- Cisco 2600 Series Multiservice Platforms
Known Affected Releases
Symptom: On a 3850 switch with NEAT configured, the Authenticator switch will dynamically change the uplink port from the supplicant switch to a trunk port after the supplicant switch authenticates to the Authenticator switch/Radius server. If the admin then makes a change on the 3850 switch and saves the running configuration to the start-up configuration. The dynamically changed port configuration is also saved into the startup configuration. Therefore, when the switch reloads, the uplink port on the Authenticator comes up as a trunk port instead of an Access port as desired. Conditions: NEAT Configuration -3850 running 03.03.04SE as the Authenticator -Radius server passes cisco-av-pair= device-traffic-class=switch to the Authenticator switch -Uplink port from Supplicant switch on 3850 dynamically changes to a trunk port -Make other changes and save configuration on the switch.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases