Preview Tool

Cisco Bug: CSCur09549 - Config sync rollback failure for failed port-channel member

Last Modified

Sep 17, 2019

Products (10)

  • Cisco Nexus 5000 Series Switches
  • Cisco Nexus 5548P Switch
  • Cisco Nexus 5596UP Switch
  • Cisco Nexus 6004 Switch
  • Cisco Nexus 6001 Switch
  • Cisco Nexus 5672UP Switch
  • Cisco Nexus 56128P Switch
  • Cisco Nexus 5696Q Switch
  • Cisco Nexus 5548UP Switch
  • Cisco Nexus 5596T Switch

Known Affected Releases

7.0(2)N1(1) 7.0(4)N1(1)

Description (partial)

The commands are executed and not rollback'ed on failure

When configuring interface ethernet/fexes in wrong order, we will get following error

command failed: port not compatible [Duplex Mode]

E.g of such order is as follow:

P3-SP6-96P(config-sync-sp)# show switch-profile buffer 

switch-profile  : asw
Seq-no  Command
1       interface Ethernet5/1/2
1.1       switchport mode trunk
1.2       speed 1000
1.3       duplex full
1.4       channel-group 25    <<<<<< This command will result in faulure

But first 3 commands are executed

P3-SP6-96P(config-sync-sp)# sh run int eth5/1/2

!Command: show running-config interface Ethernet5/1/2
!Time: Tue Sep 30 21:34:16 2014

version 7.1(0)N1(1)

interface Ethernet5/1/2
  switchport mode trunk
  speed 1000
  duplex full
Bug details contain sensitive information and therefore require a account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.