Guest

Preview Tool

Cisco Bug: CSCuq81084 - Tx9X00 secondary codecs Auto negotiation is disabled negotiates 100Mb

Last Modified

Jan 29, 2018

Products (1)

  • Cisco TelePresence TX9000 Series

Known Affected Releases

6.1.2

Description (partial)

Symptom:
After primary codec replacement the scondary codec may go 100Mb because of negotiating disabled. This can cause pixalisation on the respective codecs side at the far end on the call.

admin:utils system left
left:show network eth0
 
 
Ethernet 0 - Primary
DHCP         : Enabled            Link Status: Up
IP Address   : 192.168.2.2        IP Mask    : 255.255.255.0
MAC Address  : 1C:DF:0F:77:24:4C  VLAN       : (null)
Mode         : Auto disabled, full duplex, 100MB/s
 
DNS
Primary      : (null)             Secondary  : (null)
Domain       : (null)
Gateway      : (null)
left:quit
Connection to ts2.local closed.
admin:utils system rigt
 
Executed command unsuccessfully
No valid command entered
admin:utils system right
right:show network eth0
 
 
Ethernet 0 - Primary
DHCP         : Enabled            Link Status: Up
IP Address   : 192.168.3.2        IP Mask    : 255.255.255.0
MAC Address  : 1C:DF:0F:77:24:52  VLAN       : (null)
Mode         : Auto disabled, full duplex, 100MB/s
 
DNS
Primary      : (null)             Secondary  : (null)
Domain       : (null)
Gateway      : (null)
right:quit
Connection to ts3.local closed.
admin:utils system presentation
presentation:show network eth0
 
 
Ethernet 0 - Primary
DHCP         : Enabled            Link Status: Up
IP Address   : 192.168.4.2        IP Mask    : 255.255.255.0
MAC Address  : 1C:DF:0F:77:24:3F  VLAN       : (null)
Mode         : Auto disabled, full duplex, 100MB/s
 
DNS
Primary      : (null)             Secondary  : (null)
Domain       : (null)
Gateway      : (null)

Conditions:
Few are:

**New install
**Primary codec replacement

Also you can see the below value in showtech runtime log

UP_ETH_CONFIG=tb_full
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.