Guest

Preview Tool

Cisco Bug: CSCuq62402 - Display of I/O rates-Load interval values not displayed for Port Channel

Last Modified

Aug 04, 2016

Products (8)

  • Cisco Nexus 7000 Series Switches
  • Cisco Nexus 7000 10-Slot Switch
  • Cisco Nexus 7000 4-Slot Switch
  • Cisco Nexus 7700 6-Slot Switch
  • Cisco Nexus 7000 18-Slot Switch
  • Cisco Nexus 7700 18-Slot Switch
  • Cisco Nexus 7700 10-Slot Switch
  • Cisco Nexus 7000 9-Slot Switch

Known Affected Releases

6.2(8a)

Description (partial)

Symptom:
show interface port 101 counters brief load-interval 1 command does not display values for port-channel.

Conditions:
While configuring load-interval on the port-channel

Nexus7k-s01# sh int port 101
port-channel101 is up
admin state is up
vPC Status: Up, vPC number: 101
  Hardware: Port-Channel, address: 0024.f71a.2926 (bia 0024.f71a.2926)
  Description: vPC to Nexus5k-s01
  MTU 1500 bytes, BW 20000000 Kbit, DLY 10 usec
  reliability 255/255, txload 105/255, rxload 1/255
  Encapsulation ARPA, medium is broadcast
  Port mode is trunk
  full-duplex, 10 Gb/s
  Input flow-control is off, output flow-control is off
  Auto-mdix is turned off
  Switchport monitor is off
  EtherType is 0x8100
  Members in this channel: Eth9/11, Eth9/12
  Last clearing of "show interface" counters never
  2 interface resets
  Load-Interval #1: 1 minute, 40 second (100 seconds)
    100 seconds input rate 128 bits/sec, 0 packets/sec
    100 seconds output rate 8246272104 bits/sec, 1314731 packets/sec
    input rate 128 bps, 0 pps; output rate 8.25 Gbps, 1.31 Mpps
  Load-Interval #2: 50 seconds
    50 seconds input rate 272 bits/sec, 0 packets/sec
    50 seconds output rate 8193058888 bits/sec, 1306339 packets/sec
    input rate 272 bps, 0 pps; output rate 8.19 Gbps, 1.31 Mpps
  Load-Interval #3: 3 minute, 20 second (200 seconds)
    200 seconds input rate 48 bits/sec, 0 packets/sec
    200 seconds output rate 8279295728 bits/sec, 1320006 packets/sec
    input rate 48 bps, 0 pps; output rate 8.28 Gbps, 1.32 Mpps
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.