Cisco Bug: CSCuq25336 - soft reset on 10EX card followed by fiber pull hangs IB initialization
Sep 13, 2019
- Cisco ONS 15454 Series Multiservice Provisioning Platforms
Known Affected Releases
10.10 10.101 9.401 9.605
Symptom: Sometimes IB-5G client port does not recover failure after multiple Rx fiber pull-out during inter-op with the IBM mainframe 4 port IB-5G card. Conditions: Create a IB-5G Transponder on Txp-Mr-10E-x card with supported IB-5G pluggables. Connect the IB-5G client ports to IBM main frame 4 port IB-5G card. Make sure the IB-5G traffic and link is up. Plug-out the IB-5G client Rx fiber, wait for a minute and plug-in back the fiber back and check if the IB-5G client recovers from failure. Try this multiple times and it was observed sometimes IB-5G client fails to recover.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases