Symptom:
Local Mep is not receiving AIS on port-channel member link

Conditions:
After removing and adding ethernet cfm domain Local Mep is not receiving AIS on port-channel member link

snipp>>
Enter configuration commands, one per line.  End with CNTL/Z.
RUDY4(config)#
interface GigabitEthernet0/0/2
no ethernet cfm mep domain OPERATOR_A_INT mpid 111 port
ethernet cfm domain OPERATOR_A_INT level 0
no service s3 port
end

--- 14:34:27 ---
429: 2014-07-23T14:34:27: %SCRIPT-6-INFO: {_haExecCmd: Executing cmd config with RUDY4-a}

+++ 14:34:27 RUDY4-a config +++
config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
RUDY4(config)#ethernet cfm domain OPERATOR_A_INT level 0
service s3 port
continuity-check
continuity-check interval 1s
interface GigabitEthernet0/0/2
no shut
ethernet cfm mep domain OPERATOR_A_INT mpid 112 port
end
RUDY4#

show ethernet cfm ma lo det interface GigabitEthernet0/0/2
Local MEPs:
----------

MPID: 111
DomainName: OPERATOR_A_INT
MA Name: s3
Level: 0
Direction: Down
Vlan: none
Interface: Gi0/0/2
CC Offload: No
CC-Status: Enabled
CC Loss Threshold: 3
MAC: 580a.20c5.2682
LCK-Status: Enabled
LCK Period: 60000(ms)
LCK Expiry Threshold: 3.5
Level to transmit LCK: Default
Defect Condition: No Defect
presentRDI: FALSE
AIS-Status: Enabled
AIS Period: 60000(ms)
AIS Expiry Threshold: 3.5
Level to transmit AIS: Default
Suppress Alarm configuration: Enabled
Suppressing Alarms: No
Source: Static

MIP Settings:
-------------
Local MIPs: None
RUDY4#