Cisco Bug: CSCuo12169 - MDS 9710 incorrect EEM quemapping may cause core files to be generated.
Last Modified
Oct 22, 2019
Products (1)
- Cisco MDS 9000 Series Multilayer Switches
Known Affected Releases
6.2(7)S44 6.2(7)S48
Description (partial)
Symptom: If you incorrectly apply an EEM applet with the wrong modules you may see a core file get generated. Conditions: If you initially configure the applet against module 1 but define a different module in the event module and action definitions you may see core files get generated as seen below. MDS-9710-FCIP-2# Conf t Enter configuration commands, one per line. End with CNTL/Z. MDS-9710-FCIP-2(config)# event manager applet quemapping_module1 MDS-9710-FCIP-2(config-applet)# event module status online module 2 action 1.0 cli slot 2 test hardware internal f16_que inst 0 register write name F16_IQM_DCE_UPMAP value 0x16f action 2.0 cli slot 2 test hardware internal f16_que inst 1 register write name F16_IQM_DCE_UPMAP value 0x16f action 3.0 cli slot 2 test hardware internal f16_que inst 2 register write name F16_IQM_DCE_UPMAP value 0x16f action 4.0 cli slot 2 test hardware internal f16_que inst 3 register write name F16_IQM_DCE_UPMAP value 0x16f action 5.0 cli slot 2 test hardware internal f16_que inst 4 register write name F16_IQM_DCE_UPMAP value 0x16f action 6.0 cli slot 2 test hardware internal f16_que inst 5 register write name F16_IQM_DCE_UPMAP value 0x16f end 2014 Apr 4 13:22:51 MDS-9710-FCIP-2 %SYSMGR-2-SERVICE_CRASHED: Service "module" (PID 4396) hasn't caught signal 11 (core will be saved). 2014 Apr 4 13:22:51 MDS-9710-FCIP-2 %SYSMGR-STANDBY-2-SERVICE_CRASHED: Service "module" (PID 4723) hasn't caught signal 11 (core will be saved). MDS-9710-FCIP-2(config-applet)# action 1.0 cli slot 2 test hardware internal f16_que inst 0 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# action 2.0 cli slot 2 test hardware internal f16_que inst 1 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# action 3.0 cli slot 2 test hardware internal f16_que inst 2 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# action 4.0 cli slot 2 test hardware internal f16_que inst 3 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# action 5.0 cli slot 2 test hardware internal f16_que inst 4 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# action 6.0 cli slot 2 test hardware internal f16_que inst 5 register write name F16_IQM_DCE_UPMAP value 0x16f MDS-9710-FCIP-2(config-applet)# end
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Status
- Severity
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases