Cisco Bug: CSCun98476 - NXOS missing HSRP command to verify group members in Listen state.
May 05, 2016
- Cisco Nexus 7000 Series Switches
- Cisco Nexus 7000 10-Slot Switch
- Cisco Nexus 7000 4-Slot Switch
- Cisco Nexus 7700 18-Slot Switch
- Cisco Nexus 7000 18-Slot Switch
- Cisco Nexus 7000 9-Slot Switch
- Cisco Nexus 7700 10-Slot Switch
Known Affected Releases
Symptom: 1. NXOS missing HSRP command to verify group members in Listen state. 2 .When N7K switch is in HSRP listen state it is not seen ?show standby neighbors? on an IOS switch, N7K switch is visible to IOS devices only when N7K is in HSRP active or HSRP standby. Details as follows - Topology: Three Switches - N7K-1, Cat6K-1 and Cat6K-2 in an HSRP group. When N7K-1 ? Standby (or Active) Cat6k-1 ? Active Cat6k-2 ? Listen Then:- N7K-1 is in ?show standby neighbor" BGL.L.15-6500-1#show standby neighbors HSRP neighbors on Vlan400 10.126.145.40 Active groups: 1 No standby groups 10.126.145.70 <<<<<< N7K-1 IP No active groups No standby groups Passive timer expires in 159 Problem state: When N7K-1 ? Listen Cat6k-1 ? Active Cat6k-2 ? Standby N7K-1# show hsrp brief P indicates configured to preempt. | Interface Grp Prio P State Active addr Standby addr Group addr Vlan400 1 10 Listen 10.126.145.40 10.126.145.3 10.126.145.1 (conf) Then:- N7K-1 is not in ?show standby neighbor? on Cat6k-1 or Cat6k-2 Conditions: 1. NXOS don't have any equivalent command which we have in IOS "show standby neighbors vlan" to discover/list the group members in Listen State. 2.From debugs on Cat6k - IOS sends passive hello messages in listen mode, however debugs from N7K doesn't send passive hello message. As per the debugs on the IOS when its in the HSRP listen state it sends below packet telling the other HSRP peers that its in the listen state. Apr 24 11:32:05.932: HSRP: Vl400 Interface adv out, Passive, active 0 passive 1 We do not see the same for the nexus on its debugs.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases