Guest

Preview Tool

Cisco Bug: CSCum97792 - End soft key is displayed in Green color after initiating intercom call

Last Modified

Sep 18, 2014

Products (1)

Known Affected Releases

10.2(1)

Description (partial)

Symptom:
[Hardware and software]:
Endpoint A:DX-80 and 10-2-1D20-9dev
Endpoint B:DX-80 and 10-2-1D20-9dev

precondition:
Configure Intercom feature: 
The phone which needs intercom ability will be configured with a special DN. 
Each origination and termination of intercom is done using this DN.

Step 1: Create intercom partition, intercom CSS, and intercom DNs from UCM admin --> Call Routing-> Intercom. 
This is done automatically for 7.0 UCM.

Step 2: Add intercom line to phone button template from UCM Admin --> Device --> Device Settings --> Phone Button Templates.

Configure a line button template with intercom. Either Create new template or add intercom line to existing template.

Step 3: Register 2 SIP phones with UCM using this template.

Step 4: Assign intercom DN XXXX to intercom line for these phones from UCM Admin --> Device -> Phone


Steps to reproduce:
1. Configure endpoints A and B with Intercom line using above steps.
2. In endpoint A, press the Intercom PFK and dial B Intercom DN to initiate the whisper intercom call.
3. Connect intercom call by selecting Connect button of Whisper from popup in endpoint B and observe the behavior.
   
Expected behavior:
End soft key is displayed in Red color

Actual behavior:
End soft key is displayed in Green color

Conditions:
[Hardware and software]:
Endpoint A:DX-80 and 10-2-1D20-9dev
Endpoint B:DX-80 and 10-2-1D20-9dev

precondition:
Configure Intercom feature: 
The phone which needs intercom ability will be configured with a special DN. 
Each origination and termination of intercom is done using this DN.

Step 1: Create intercom partition, intercom CSS, and intercom DNs from UCM admin --> Call Routing-> Intercom. 
This is done automatically for 7.0 UCM.

Step 2: Add intercom line to phone button template from UCM Admin --> Device --> Device Settings --> Phone Button Templates.

Configure a line button template with intercom. Either Create new template or add intercom line to existing template.

Step 3: Register 2 SIP phones with UCM using this template.

Step 4: Assign intercom DN XXXX to intercom line for these phones from UCM Admin --> Device -> Phone


Steps to reproduce:
1. Configure endpoints A and B with Intercom line using above steps.
2. In endpoint A, press the Intercom PFK and dial B Intercom DN to initiate the whisper intercom call.
3. Connect intercom call by selecting Connect button of Whisper from popup in endpoint B and observe the behavior.
   
Expected behavior:
End soft key is displayed in Red color

Actual behavior:
End soft key is displayed in Green color
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.