Guest

Preview Tool

Cisco Bug: CSCum89257 - 511 commit replace fails on 1st try, and passes on 2nd try

Last Modified

Jul 20, 2018

Products (1)

  • Cisco ASR 9000 Series Aggregation Services Routers

Known Affected Releases

5.1.1.BASE

Description (partial)

RP/0/0/CPU0:ios(config-if)# service-policy output ntt-cos-limited-out
RP/0/0/CPU0:ios(config-if)#commit replace
Mon Feb  3 15:30:46.941 PST

This commit will replace or remove the entire running configuration. This
operation can be service affecting.
Do you wish to proceed? [no]: y

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors

RP/0/0/CPU0:ios(config-if)#show  configuration  failed 
Mon Feb  3 15:31:03.386 PST
!! SEMANTIC ERRORS: This configuration was rejected by 
!! the system due to semantic errors. The individual 
!! errors with each failed configuration command can be 
!! found below.


interface Bundle-Ether4
 service-policy output ntt-cos-limited-out
!!% 'sysdb' detected the 'warning' condition 'A client of SysDB attempted to create an item that already exists'
!
end

Symptom:
RP/0/0/CPU0:ios(config-if)# service-policy output ntt-cos-limited-out
RP/0/0/CPU0:ios(config-if)#commit replace
Mon Feb  3 15:30:46.941 PST

This commit will replace or remove the entire running configuration. This
operation can be service affecting.
Do you wish to proceed? [no]: y

% Failed to commit one or more configuration items during a pseudo-atomic operation. All changes made have been reverted. Please issue 'show configuration failed' from this session to view the errors

RP/0/0/CPU0:ios(config-if)#show  configuration  failed 
Mon Feb  3 15:31:03.386 PST
!! SEMANTIC ERRORS: This configuration was rejected by 
!! the system due to semantic errors. The individual 
!! errors with each failed configuration command can be 
!! found below.


interface Bundle-Ether4
 service-policy output ntt-cos-limited-out
!!% 'sysdb' detected the 'warning' condition 'A client of SysDB attempted to create an item that already exists'
!
end

Conditions:
commit replace with already existed config. For example.

conf t
class-map match-any control-q
 match precedence 6 7
 end-class-map
policy-map ntt-cos-limited-out
 class control-q
  bandwidth percent 5
interface Bundle-Ether4
 service-policy output ntt-cos-limited-out
commit
conf t
class-map match-any control-q
 match precedence 6 7
 end-class-map
policy-map ntt-cos-limited-out
 class control-q
  bandwidth percent 5
interface Bundle-Ether4
 service-policy output ntt-cos-limited-out
interface bundle-ether 4
 no service-policy output
 service-policy output ntt-cos-limited-out
commit replace
y
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.