Symptom:
After deleting Y-cable trunk alarm severity not moving back to CR/MJ in WSE card

Conditions:
1.Create a 10Gig on client and OTU2 on trunk port of two WSE
2.Make Sure LOS is present on both trunk ports
3.Check alarm severity on both trunk ports(should be "CR")
4.Create the y-cable configuration
5.Check alarm severity on both trunk ports (protect trunk should be in "MN" and working will be in "CR")
6.Delete Y-cable configuration
7.Check alarm severity on both trunk (both should be in "CR" as there is no Y-cable configuration)