Guest

Preview Tool

Cisco Bug: CSCum00305 - FPD upgrade message is misleading

Last Modified

Feb 12, 2018

Products (1)

  • Cisco ASR 9000 Series Aggregation Services Routers

Known Affected Releases

4.3.2.BASE

Description (partial)

Symptom:
Message below appear when doing FPD upgrade in condition when there is no actual upgrade FPD in progress

FPD upgrade in progress on some hardware, reload/configuration change
on those is not recommended as it might cause HW programming failure
and result in RMA of the hardware.


RP/0/RSP0/CPU0:ios(admin)#upgrade hw-module fpd all location all
Wed Dec 11 00:09:26.684 UTC

***** UPGRADE WARNING MESSAGE: *****
  *  This upgrade operation has a maximum timout of 160 minutes.  *
  *  If you are executing the cmd for one specific location and  *
  *  card in that location reloads or goes down for some reason  *
  *  you can press CTRL-C to get back the RP's prompt.           *
  *  If you are executing the cmd for _all_ locations and a node *
  *  reloads or is down please allow other nodes to finish the   *
  *  upgrade process before pressing CTRL-C.                     *

% RELOAD REMINDER:
  - The upgrade operation of the target module will not interrupt its normal
    operation. However, for the changes to take effect, the target module
    will need to be manually reloaded after the upgrade operation. This can
    be accomplished with the use of "hw-module <target> reload" command.
  - If automatic reload operation is desired after the upgrade, please use
    the "reload" option at the end of the upgrade command.
  - The output of "show hw-module fpd location" command will not display
    correct version information after the upgrade if the target module is
    not reloaded.
NOTE: Chassis CLI will not be accessible while upgrade is in progress.
Continue? [confirm]
This can take some time for a full chassis.
Ensure that system is not power cycled during the upgrades.
Please consult the documentation for more information.
Continue ? [no]: yes


FPD upgrade in progress on some hardware, reload/configuration change
on those is not recommended as it might cause HW programming failure
and result in RMA of the hardware.


No fpd on location 0/RSP0/CPU0 need upgrade at this time.
No fpd on location 0/RSP1/CPU0 need upgrade at this time.
No fpd on location 0/0/CPU0 need upgrade at this time.
No fpd on location 0/1/CPU0 need upgrade at this time.
No fpd on location 0/2/CPU0 need upgrade at this time.
No fpd on location 0/3/CPU0 need upgrade at this time.


FPD upgrade has ended.

RP/0/RSP0/CPU0:ios(admin)#

Conditions:
FPD upgrade
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.