Cisco Bug: CSCul13302 - Terminal Loopback can be set on client and trunk ports concurrently
Nov 05, 2014
- Cisco ONS 15454 Series Multiservice Provisioning Platforms
Known Affected Releases
Symptom: Terminal Loopback is allowed on client and trunk ports at the same time on 100G-CK-C card configured as MXP_2x40G with 40G payload .But If it is applied on Trunk port, it should be denied on Client ports. If it is applied on Client port, it should be denied on Trunk port. Conditions: 1. Consider 100G-CK-C card configured as MXP_2x40G and provision FORTY_GE payloads on client ports. 2. Go to Loopback panel: configure first the Terminal Loopback on the two client ports. 3. Then configure the Terminal Loopback on the Trunk port: the operation is allowed so that Terminal Loopback can be applied on both client and trunk ports concurrently.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases