Guest

Preview Tool

Cisco Bug: CSCuj53336 - Failed cmds on port-profile conf not shown correctly on accounting log

Last Modified

Oct 25, 2018

Products (7)

  • Cisco Nexus 7000 Series Switches
  • Cisco Nexus 7000 10-Slot Switch
  • Cisco Nexus 7000 4-Slot Switch
  • Cisco Nexus 7000 18-Slot Switch
  • Cisco Nexus 7700 18-Slot Switch
  • Cisco Nexus 7700 10-Slot Switch
  • Cisco Nexus 7000 9-Slot Switch

Known Affected Releases

6.2(2)

Description (partial)

Symptom:
Nexus(config-port-prof)# switchport trunk allowed vlan add 71
ERROR: This form of the command has no effect on the current system

Fri Sep 27 16:15:08 2013:type=update:id=console0:user=admin:cmd=switchto ; configure terminal ; port-profile type port-channel GANETTI-OKEANOS ; switchport trunk allowed vlan add 71 (REDIRECT)

The above log should be a FAILURE instead

Conditions:
Config Sequence 1

Nexus# conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Nexus(config)# port-profile type port-channel TEST
Nexus(config-port-prof)# no switchport trunk allowed vlan 1-4094
Nexus(config-port-prof)# switchport trunk allowed vlan add 71
ERROR: This form of the command has no effect on the current system
Nexus(config-port-prof)#

Config Sequence 2

Nexus(config-port-prof)#  no switchport trunk allowed vlan 
Nexus(config-port-prof)# switchport trunk allowed vlan add 71
ERROR: This form of the command has no effect on the current system


Please note: This is not a problem with Port-profile. It is working fine. In the above sequence, we would expect "switchport trunk allowed vlan 71" as there are no VLANs in the port-profile config and an add is not applicable.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.