Cisco Bug: CSCuj20965 - Documentation Bug - BFD Global Configuration - Clarification of Results
Feb 03, 2017
- Cisco Nexus 7000 Series Switches
Known Affected Releases
Symptom: In the BFD Configuration Guide for Nexus 7000, under the section "Configuring Global BFD Parameters", there is misleading information in Purpose field of Detailed Step 2. http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/interfaces/configuration/guide/if_bfd.html#wp1076223 It reads <i>Step 2 Command bfd interval mintx min_rx msec multiplier value Example: switch(config)# bfd interval 50 min_rx 50 multiplier 3 Purpose Configures the BFD session parameters for all BFD sessions on the device. This command overrides these values by configuring the BFD session parameters on an interface. The mintx and msec range is from 50 to 999 milliseconds and the default is 50. The multiplier range is from 1 to 50. The multiplier default is 3.</i> Conditions: This applies to technical documentation only.
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases