Guest

Preview Tool

Cisco Bug: CSCuj11210 - netflow session config missing on vNIC after upgrade

Last Modified

Feb 01, 2017

Products (1)

  • Cisco Unified Computing System

Known Affected Releases

2.2(0.258)A

Description (partial)

Symptom:
1) vNIC has no Netflow session configuration downloaded after upgrade (auto install)

2) After upgrade access GUI and Primary to check the vNIC configuration

Conditions:
Configuration:
===========
adapter 1/3/1 (mcp):3# vif_nserv_nf_plcy_get 2.0 10
                      vif name : vnic13/lif2/vif2.0
                 primary lifid : 2
        ---------------------- : --------------------
                INTERFACE INFO :
        ---------------------- : --------------------
                       if_name :
                    snmp index : 0x0
                    shadow lif : 0
                      vsi_uuid :
                       vs_uuid :
                      vsi_name :
                       vs_name :
                  l2segment_id : 0
        ---------------------- : --------------------
                    EXPORTER 0 : NOT USED
        ---------------------- : --------------------
                    EXPORTER 1 : NOT USED
        ---------------------- : --------------------
                 EGRESS POLICY : NOT USED
adapter 1/3/1 (mcp):4#
adapter 1/3/1 (mcp):4#
adapter 1/3/1 (mcp):4#
adapter 1/3/1 (mcp):4#
adapter 1/3/1 (mcp):4# exit

adapter 1/3/1 (top):2# exit
rlogin: connection closed.
adapter 1/3/1 # exit
cc18-f2-B# show cluster extended-state
Cluster Id: 0x365d98d8b1ba11e2-0x8869547fee0bc404

Start time: Sat Sep  7 00:06:17 2013
Last election time: Sat Sep  7 16:15:34 2013

B: UP, PRIMARY
A: UP, SUBORDINATE

B: memb state UP, lead state PRIMARY, mgmt services state: UP
A: memb state UP, lead state SUBORDINATE, mgmt services state: UP
   heartbeat state PRIMARY_OK

INTERNAL NETWORK INTERFACES:
eth1, UP
eth2, UP

HA READY
Detailed state of the device selected for HA storage:
Chassis 1, serial: FOX1652GF5A, state: active
cc18-f2-B# scope eth-flow-mon
cc18-f2-B /eth-flow-mon # show flow-mon-session ext
cc18-f2-B /eth-flow-mon # show flow-mon-session expand

Flow Monitor Session:
    Name: monSessionS2
    Description:

    Flow Monitor:
        Flow Monitor Name Direction
        ----------------- ---------
        monitorS2         Receive
        monitorS2         Transmit

    Name: netflow-sess1  <===
    Description:

    Flow Monitor:
        Flow Monitor Name Direction
        ----------------- ---------
        2nd-netflow       Receive
        2nd-netflow       Transmit
cc18-f2-B /eth-flow-mon #
cc18-f2-B /eth-flow-mon #
cc18-f2-B /eth-flow-mon # scope org
cc18-f2-B /org # scope service-profile server 1/3
cc18-f2-B /org/service-profile # scope vnic eth0
cc18-f2-B /org/service-profile/vnic # show flow-mon-src

Netflow Monitoring Source:
    Name
    ----
    netflow-sess1
cc18-f2-B /org/service-profile/vnic # show flow-mon-src expand

Netflow Monitoring Source:
    Name
    ----
    netflow-sess1
cc18-f2-B /org/service-profile/vnic # show configuration
 enter vnic eth0 fabric a-b
     enter eth-if B2-2001
         set default-net no
     exit
     enter eth-if MGR
         set default-net yes
     exit
     enter eth-if Mgmt
         set default-net no
     exit
     enter eth-if default
         set default-net no
     exit
     enter eth-if vlan999
         set default-net no
     exit
     enter flow-mon-src netflow-sess1 <===
     exit
     set adapter-policy Linux
     set fabric a-b
     set identity dynamic-mac 00:CC:18:B2:00:BF
     set identity mac-pool default
     set mtu 1500
     set nw-control-policy ""
     set order 1
     set pin-group ""
     set qos-policy ""
     set stats-policy default
     set template-name ""
     set vcon 1
 exit
cc18-f2-B /org/service-profile/vnic #


Before upgrade to 2.2(0.258) from 2.2(0.253)
==================================

Software
  BIOS:      version 3.6.0
  loader:    version N/A
  kickstart: version 5.2(3)N2(2.21) [build 5.2(3)N2(2.20.253)] [gdb]
  system:    version 5.2(3)N2(2.21) [build 5.2(3)N2(2.20.253)] [gdb]
  power-seq: Module 1: version v5.0
             Module 3: version v1.0
  uC:        version v1.0.0.2
  SFP uC:    Module 1: v1.1.0.0
  BIOS compile time:       05/09/2012
  kickstart image file is: bootflash:///installables/switch/ucs-6100-k9-kickstar
t.5.2.3.N2.2.20.253.gbin
cc18-f2-A(config-if)(nx-os)#
cc18-f2-A(config-if)(nx-os)#
cc18-f2-A(config-if)(nx-os)#
cc18-f2-A(config-if)(nx-os)#
cc18-f2-A(config-if)(nx-os)#
cc18-f2-A(config-if)(nx-os)# exit
cc18-f2-A(config)(nx-os)# sho ip route
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]

10.255.99.0/24, ubest/mbest: 1/0, attached, pending
    *via 10.255.99.100, Vlan999, [0/0], 22:30:23, direct
10.255.99.100/32, ubest/mbest: 1/0, attached, pending
    *via 10.255.99.100, Vlan999, [0/0], 22:30:23, local
cc18-f2-A(config)(nx-os)# exit
cc18-f2-A(nx-os)# exit
Linux# ucssh -p admin


Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php


cc18-f2-A#
cc18-f2-A#
cc18-f2-A#
cc18-f2-A# conne adapter 1/3/1


adapter 1/3/1 #
adapter 1/3/1 #
adapter 1/3/1 # connect
adapter 1/3/1 (top):1# att
attach-fls  attach-mcp
adapter 1/3/1 (top):1# attach-mcp
adapter 1/3/1 (mcp):1# vnic
vnic id       : internal id of vnic, use for other vnic cmds
vnic name/mac : ucsm provisioned name (-n) or mac address (-m)
vnic type     : enet=ethernet, enet_pt=dynamic ethernet, fc=fcoe
vnic bb:dd.f  : host pci bus/device/function id
vnic state    : state of vnic
lif           : internal logical if id, use for other lif/vif cmds
lif state     : state of lif
vif uif       : bound uplink 0 or 1, =:primary, -:secondary, >:current
vif ucsm      : ucsm id for this vif
vif idx       : switch id for this vif
vif vlan      : default vlan for traffic
vif state     : state of vif
---------------------------------------- --------- --------------------------
                v n i c                    l i f             v i f
id  name           type    bb:dd.f state lif state uif  ucsm   idx vlan state
--- -------------- ------- ------- ----- --- ----- --- ----- ----- ---- -----
 13 vnic_1         enet    06:00.0 UP      2 UP    =>0   876    28  100 UP
                                                   - 1   877    20  100 UP
 14 vnic_2         enet    07:00.0 UP      3 UP    - 0   879    29  100 UP
                                                   =>1   878    21  100 UP
 15 vnic_3         fc      08:00.0 UP      4 DOWN  =>0   871    30 4048 DOWN
 16 svnic_0        svnic   03:00.0 UP      5 UP    =>0   867    31    1 UP
 17 svnic_1        svnic   03:00.0 UP      6 UP    =>1   868    22    1 UP
adapter 1/3/1 (mcp):2# vif_nserv_nf_plcy_get 2.0 11~
Invalid direction string 11~
adapter 1/3/1 (mcp):3# vif_nserv_nf_plcy_get 2.0 11
                      vif name : vnic13/lif2/vif2.0
                 primary lifid : 2
        ---------------------- : --------------------
                INTERFACE INFO :
        ---------------------- : --------------------
                       if_name :
                    snmp index : 0x1c0036b0
                    shadow lif : 0
                      vsi_uuid :
                       vs_uuid :
                      vsi_name :
                       vs_name : Veth876
                  l2segment_id : 0
        ---------------------- : --------------------
                    EXPORTER 0 : USED
        ---------------------- : --------------------
                  exp-0 dst ip : 0xaff6363 (10.255.99.99)
                  exp dst port : 9995
                       exp tos : 28
                exp timer intf : 600
           exp timer exp stats : 600
           exp timer data temp : 600
         exp timer option temp : 0
        ---------------------- : --------------------
                    EXPORTER 0 : SUB-INTERFACE
        ---------------------- : --------------------
                       intf_id : 0
                     intf name : eth4.999
                  exp-0 src ip : 0xaff6364 (10.255.99.100)
             exp-0 src ip mask : 0xffffff0 (255.255.255.0)
           exp-0 routing agent : 0xaff6363 (10.255.99.99)
                          vlan : 999
                           cos : 0
                       src_mac : 54:7f:ee:0b:c4:41
                   gateway_mac : 00:0c:29:52:7e:60
        ---------------------- : --------------------
                    EXPORTER 1 : NOT USED
        ---------------------- : --------------------
                INGRESS POLICY : USED
        ---------------------- : --------------------
                plcy mon_flags : 0x3
                     monitor-0 : predefined type not used
                    key mask : 0x18e00c0
                non_key mask : 0x3a
                aging inactive : 23040
                  aging active : 25603
                aging fast age : 59392
                aging fast pkt : 8195
                aging inactive : 2

        ---------------------- : --------------------
                 EGRESS POLICY : USED
        ---------------------- : --------------------
                plcy mon_flags : 0x3
                     monitor-0 : predefined type not used
                    key mask : 0x18e00c0
                non_key mask : 0x3a
                aging inactive : 23040
                  aging active : 25603
                aging fast age : 59392
                aging fast pkt : 8195
                aging inactive : 2

adapter 1/3/1 (mcp):4#
adapter 1/3/1 (mcp):4#
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.