Cisco Bug: CSCtd41676 - Nexus may show "port not compatible [port egress queuing policy]"
Jan 05, 2016
- Cisco Nexus 7000 Series Switches
Known Affected Releases
None Symptom: If a new 'channel-group' number is configured on a physical interface that already has a service-policy applied, the below error will be displayed: Example: N7k(config)# int e1/1 N7k(config-if)# service-policy type queuing output 10G-qing-out N7k(config-if)# channel-group 1 mode on command failed: port not compatible [port egress queuing policy] Conditions: This may be seen in the below config sequence scenario: 1. Initially configure 'channel-group 1' on E1/1-2 2. E1/1-2 is then configured with an egress queueing service-policy, which as expected, will copy the service-policy to E1/1-8 and Po1. 3. Next, 'channel-group 2' is configured on E1/3-4, and the configuration fails with the error 'port not compatible [port egress queuing policy]'. This fails because E1/3-4 already has a service-policy configured from step 2,
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.
Bug Details Include
- Full Description (including symptoms, conditions and workarounds)
- Known Fixed Releases
- Related Community Discussions
- Number of Related Support Cases