Preview Tool

Cisco Bug: CSCtd00232 - 7921 and 7925 deployment guides should warn about BS and LB

Last Modified

May 10, 2010

Products (1)

  • Cisco Unified IP Phone 7900 Series

Known Affected Releases


Description (partial)

As of WLC version 6.0 there are two features introduced under WLAN SSID configuration and are enabled by default when you create a new WLAN profile. They are:
- Band Select
- Load Balancing

On WLC version these two feature cannot be configured from the WEB Interface of the WLC however they can be configured via the CLI.

Since these two features have negative impact on Voice over wireless they both should disabled under the voice SSID. The commands to disable these features under the WLC CLI are:

config wlan band-select allow disable <WLAN ID>
config wlan load-balance allow disable <WLAN ID>

To verify the state of these features under your SSID issue the following command:

show wlan <WLAN ID>

It should show you the end:
Band Select...................................... Disabled
Load Balancing................................... Disabled

Important Note: if these two features are disabled globally then they are not active even when they are enabled on the SSID.

As described above
Bug details contain sensitive information and therefore require a account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.