Guest

Preview Tool

Cisco Bug: CSCtc24937 - show cellular command reports no valid statistics with autoconfig enable

Last Modified

Feb 08, 2017

Products (1)

  • Cisco 800 Series Routers

Known Affected Releases

12.4(22)YB4 15.0(1)M

Description (partial)

Symptoms: The <CmdBold>show cellular<noCmdBold> command reports no valid 
statistics with autoconfig enabled.

 router#<CmdBold>sh cellular<noCmdBold> <CmdArg>0 radio history all<noCmdArg>
 
 
 router#<CmdBold>show cellular<noCmdBold> <CmdArg>0 all<noCmdArg>
 
  Hardware Information
  ====================
  Modem Firmware Version =
  Modem Firmware built =
  Hardware Version =
  International Mobile Subscriber Identity (IMSI) = 00000
  International Mobile Equipment Identity (IMEI) =
  Factory Serial Number (FSN) =
  Modem Status = Offline
  Current Modem Temperature = 0 deg C, State = Normal
 
 <..>
 
  Network Information
  ===================
  Current Service Status = Normal, Service Error = None
  Current Service = Circuit Switched
  Current Roaming Status = Home
  Network Selection Mode = Automatic
  Country = , Network =
  Mobile Country Code (MCC) = 0
  Mobile Network Code (MNC) = 0
  Location Area Code (LAC) = 0
  Routing Area Code (RAC) = 0
  Cell ID = 0
  Primary Scrambling Code = 0
  PLMN Selection = Automatic
  Registered PLMN =  , Abbreviated =
  Service Provider =
 
  Radio Information
  =================
  Current Band = None, Channel Number = 0
  Current RSSI = -0 dBm
  Band Selected = GSM 450
 
  Modem Security Information
  ==========================
  Card Holder Verification (CHV1) = Disabled
  SIM Status = OK
  SIM User Operation Required = None
  Number of Retries remaining = 0
 
 Conditions: This symptom is observed on Cisco 881 or Cisco 888 router 
 platforms with a 3G wireless interface
Bug details contain sensitive information and therefore require a Cisco.com account to be viewed.

Bug Details Include

  • Full Description (including symptoms, conditions and workarounds)
  • Status
  • Severity
  • Known Fixed Releases
  • Related Community Discussions
  • Number of Related Support Cases
Bug information is viewable for customers and partners who have a service contract. Registered users can view up to 200 bugs per month without a service contract.